Atec Agilent-N9010A - Manual (Page 10)

10
Displayed average noise level (DANL) (continued)
Preamp on, millimeter-wave
(Option 532, 544)
100 kHz to 1 MHz –145 dBm –148 dBm
1 MHz to 1.2 GHz –164 dBm –165 dBm
1.2 to 2.1 GHz –163 dBm –164 dBm
2.1 to 3.6 GHz –162 dBm –163 dBm
3.5 to 7 GHz –160 dBm –162 dBm
7 to 20 GHz –160 dBm –162 dBm
20 to 26.5 GHz –158 dBm –160 dBm
26.5 to 32 GHz –156 dBm –159 dBm
32 to 34 GHz –156 dBm –159 dBm
33.9 to 40 GHz –153 dBm –155 dBm
40 to 44 GHz –149 dBm –153 dBm
Spurious responses
Residual responses (input
terminated and 0 dB
attenuation)
200 kHz to 8.4 GHz (swept) –100 dBm
Zero span or FFT or other
frequencies
–100 dBm nominal
Tuned frequency (f) Mixer level Response
Image responses
(Excitation freq. = f + 645 MHz)
10 MHz to 3.6 GHz –10 dBm –80 dBc (–107 dBc typical)
3.6 to 13.6 GHz –10 dBm –75 dBc (–87 dBc typical)
13.6 to 17.1 GHz –10 dBm –71 dBc (–85 dBc typical)
17.1 to 22 GHz –10 dBm –68 dBc (–82 dBc typical)
22 to 26.5 GHz –10 dBm –66 dBc (–78 dBc typical)
26.5 to 34.5 GHz –30 dBm –70 dBc (–94 dBc typical)
34.5 to 44 GHz –30 dBm –60 dBc (–79 dBc typical)
LO related spurious
(f > 600 MHz from carrier,
10 MHz to 3.6 GHz)
10 MHz to 3.6 GHz –90 dBc + 20 logN 1 typical
Other spurious response Mixer level Response
Carrier frequency ≤ 26.5 GHz
First RF order
(f ≥ 10 MHz from carrier)
–10 dBm –80 dBc + 20log(N 1 ) Including IF feedthrough, LO harmonic
mixing responses
Higher RF order
(f ≥ 10 MHz from carrier)
–40 dBm –80 dBc + 20log(N 1 ) Including higher order mixer responses
Carrier frequency > 26.5 GHz
First RF order
(f ≥ 10 MHz from carrier)
–30 dBm –90 dBc nominal
Higher RF order
(f ≥ 10 MHz from carrier)
–30 dBm –90 dBc nominal
1. N is the LO multiplication factor.