Atec Agilent-N9010A - Manual (Page 20)

20
Option B25 (standard) 25 MHz analysis bandwidth
IF frequency response (demodulation and FFT response relative to the center frequency, 20 to 30 °C)
Center frequency (GHz)
Span (MHz) Preselector Max. error RMS
≤ 3.6 10 to ≤ 25 n/a ± 0.45 dB 0.051 dB nominal
> 3.6 10 to ≤ 25 on 0.45 dB nominal
> 3.6 10 to ≤ 25 off 1 ± 0.45 dB 0.071 dB nominal
IF phase linearity (deviation from mean phase linearity, nominal)
Center frequency (GHz)
Span (MHz) Preselector Peak-to-peak RMS
0.02 ≤ f < 3.6 ≤ 25 n/a 0.6° 0.14°
≥ 3.6 ≤ 25 off 1 1.9° 0.4 °
≥ 3.6 (Option ≤ 526) ≤ 25 on 4.5° 1.2°
Data acquisition (25 MHz IF path)
Time record length (IQ pairs) IQ
Analyzer
4,000,000 IQ sample pairs
89600 software or N9064A 32-bit packing 64-bit packing Memory
Option DP2, B40 or MPB 536 MSa 268 MSa 2 GB
None of the above 4,000,000 IQ sample pairs (independent of data packing)
Sample rate at ADC
Option DP2, B40 or MPB 100 MSa/s
None of the above 90 MSa/s
ADC resolution
Option DP2, B40 or MPB 16 bits
None of the above 14 bits
Option B40 40 MHz analysis bandwidth
IF frequency response (demodulation and FFT response relative to the center frequency, 20 to 30 °C), nominal
Center frequency (GHz)
Span (MHz) Preselector Max. error RMS
0.03 ≤ f < 3.6 ≤ 40 n/a ± 0.3 dB 0.08 dB
3.6 ≤ f ≤ 26.5 ≤ 40 off 1 ± 0.25 dB 0.08 dB
> 26.5 ≤ 40 off 1 ± 0.25 dB 0.12 dB
IF phase linearity (deviation from mean phase linearity, nominal)
Center frequency (GHz) Span (MHz) Preselector Peak-to-peak RMS
0.02 ≤ f < 3.6 40 n/a 0.2° 0.05°
≥ 3.6 40 off 1 5° 1.4°
Data acquisition (40 MHz IF path)
Time record length (IQ pairs) IQ analyzer 4,000,000 samples (I/Q pairs)
89600 VSA software or N9064A VXA
32-bit packing 64-bit packing 2 GB total memory (nominal)
Length (IQ sample pairs) 536 MSa 268 MSa
Length (time units) Samples/(span x 1.28) (nominal)
Sample rate
At ADC
200 Msa/s
IQ pairs Span x 1.28 (nominal)
ADC resolution 12 bits
1. Option MPB is installed and enabled.