Atec Agilent-N9010A - Manual (Page 4)

4
Frequency and Time Specifications
Frequency range DC coupled AC coupled
Option 503 10 Hz to 3.6 GHz 10 MHz to 3.6 GHz
Option 507 10 Hz to 7 GHz 10 MHz to 7 GHz
Option 513 10 Hz to 13.6 GHz 10 MHz to 13.6 GHz
Option 526 10 Hz to 26.5 GHz 10 MHz to 26.5 GHz
Option 532 10 Hz to 32 GHz NA
Option 544 10 Hz to 44 GHz NA
Band LO multiple (N)
0 1 10 Hz to 3.6 GHz
1 1 3.5 to 7.0 GHz
1 1 3.5 to 8.4 GHz
2 2 8.4 to 13.6 GHz
3 2 13.5 to 17.1 GHz
4 4 17 to 26.5 GHz
5 4 26.4 to 34.5 GHz
6 8 34.4 to 44 GHz
Frequency reference
Accuracy ± [(time since last adjustment x aging rate) + temperature stability + calibration
accuracy]
Aging rate Option PFR Standard
± 1 x 10 –7 / year ± 1 x 10 –6 / year
± 1.5 x 10 –7 / 2 years
Temperature stability
20 to 30 °C
Full temperature range
Option PFR Standard
± 1.5 x 10 –8 ± 2 x 10 –6
± 5 x 10 –8 ± 2 x 10 –6
Achievable initial calibration accuracy Option PFR Standard
± 4 x 10 –8 ± 1.4 x 10 –6
Example frequency reference accuracy
(with Option PFR)
= ± (1 x 10 –7 + 5 x 10 –8 + 4 x 10 –8 )
1 year after last adjustment = ± 1.9 x 10 –7
Residual FM
Option PFR
Standard
≤ (0.25 Hz x N) p-p in 20 ms nominal
≤ (10 Hz x N) p-p in 20 ms nominal
See band table above for N (LO Multiple)
Frequency readout accuracy (start, stop, center, marker)
± (marker frequency x frequency reference accuracy + 0.25 % x span + 5 % x RBW
+ 2 Hz + 0.5 x horizontal resolution 1 )
Marker frequency counter
Accuracy ± (marker frequency x frequency reference accuracy + 0.100 Hz)
Delta counter accuracy ± (delta frequency x frequency reference accuracy + 0.141 Hz)
Counter resolution 0.001 Hz
Frequency span (FFT and swept mode)
Range 0 Hz (zero span), 10 Hz to maximum frequency of instrument
Resolution 2 Hz
Accuracy
Swept
FFT
± (0.25 % x span + horizontal resolution)
± (0.10 % x span + horizontal resolution)
1. Horizontal resolution is span/(sweep points – 1).