Atec Agilent-N5230A - Manual (Page 8)

8
N5230A Option 140/145/146/240/245/246
Corrected system performance with 3.5 mm connectors
1
(continued)
Table 4. N4433A Electronic calibration module
N5230A
• Option 140 or 240 standard test set and standard power range
• Option 145 or 245 configurable test set and extended power range
• Option 146 or 246 configurable test set and extended power range with internal
second source
Applies to the N5230A Option 140/145/146/240/245/246 analyzers, N4433A
electronic calibration module, 85131F flexible test port cable set, and a full 4-port calibration.
Also applies to the following condition:
Environmental temperature 23° ±3 °C, with < 1 °C deviation from calibration temperature.
Specification (dB)
Description
10 to 500 MHz to 2 to 8 to 13.5 to
500 MHz 2 GHz 8 GHz 13.5 GHz 20 GHz
Directivity 52 52 47 45 45
Source match
42 42 39 31 31
Load match 45 45 41 35 35
Reflection ±0.060 ±0.060 ±0.090 ±0.040 ±0.180
tracking (+0.01/°C) (+0.01/°C) (+0.02/°C) (+0.03/°C) (+0.03/°C)
Transmission ±0.045 ±0.039 ±0.055 ±0.127 ±0.160
tracking (+0.01/°C) (+0.01/°C) (+0.02/°C) (+0.03/°C) (+0.03/°C)
Transmission uncertainty (specifications)
1. From 300 kHz to 10 MHz, performance is characterized as “typical”. To generate these typical values,
please download our free Uncertainty Calculator from
www.agilent.com/find/na_calculator.
2. All of the curves are for 2-port calibrations. Multiport uncertainties are currently not supported.
Magnitude
0.01
0.1
1
10
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
N5230A Option 140/145/146/240/245/246 full 2-port
2
cal using N4433A
S11 = S22 = 0
Source power = -5 dBm
Uncertainty (dB)
■ 10 to 500 MHz
♦ 500 MHz to 2 GHz
▲ 2 to 8 GHz
● 8 to 20 GHz
Phase
0.1
1
10
100
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
N5230A Option 140/145/146/240/245/246 full 2-port
2
cal using N4433A
S11 = S22 = 0
Source power = -5 dBm
Uncertainty (degrees)
■ 10 to 500 MHz
♦ 500 MHz to 2 GHz
▲ 2 to 8 GHz
● 8 to 20 GHz