Atec Agilent-N5230A - Manual (Page 12)

12
Table 6. Test port output 1 (Continued)
Description
Specifications Typicals
Options Options Options Options
140, 240 145, 146, 245, 246 140, 240 145, 146, 245, 246
Power range
300 kHz to 10 MHz
–27 to +8 dBm –87 to +8 dBm
10 to 45 MHz –27 to +12 dBm –87 to +11 dBm
45 MHz to 4 GHz –27 to +12 dBm –87 to +11 dBm
4 to 6 GHz –27 to +10 dBm –87 to +9 dBm
6 to 10.5 GHz –27 to +8 dBm –87 to +6 dBm
10.5 to 13.5 GHz –27 to +5 dBm –87 to +3 dBm
13.5 to 15 GHz –27 to +5 dBm –87 to +3 dBm
15 to 20 GHz –27 to +2 dBm –87 to –1 dBm
Power settings
Minimum power setting
–30 dBm –90 dBm
Maximum power setting +20 dBm +20 dBm
Harmonics (2nd or 3rd) at maximum output power
In-band source harmonics
300 kHz to 10 MHz
–17 dBc
10 MHz to 1 GHz –17 dBc
1 to 13.5 GHz –20 dBc
13.5 to 20 GHz –20 dBc
Non-harmonic spurious (at nominal output power)
300 kHz to 20 GHz
–50 dBc for offset frequency > 1 kHz
Typical performance
Phase noise (Nominal power at test port)
10 kHz Offset 100 kHz Offset 1 MHz Offset
300 kHz to 10 MHz –86 dBc/Hz –86 dBc/Hz –95 dBc/Hz
10 MHz to 1.5 GHz –86 dBc/Hz –91 dBc/Hz –95 dBc/Hz
1.5 to 3.125 GHz –83 dBc/Hz –91 dBc/Hz –95 dBc/Hz
3.125 to 6.25 GHz –77 dBc/Hz –85 dBc/Hz –89 dBc/Hz
6.25 to 12.5 GHz –71 dBc/Hz –79 dBc/Hz –83 dBc/Hz
12.5 to 13.5 GHz –65 dBc/Hz –73 dBc/Hz –77 dBc/Hz
13.5 to 20 GHz –65 dBc/Hz –73 dBc/Hz –77 dBc/Hz
1. For Options 140/145/240/245, performance specified on Port 1 only; Ports 2, 3, and 4 performance
is typical. For Options 146/246, performance is specified on Ports 1 and 3 only; Ports 2 and 4
performance is typical.