Atec Agilent-N5230A - Manual (Page 6)

6
N5230A Option 140/145/146/240/245/246
Corrected system performance with 3.5 mm connectors
1
Note: For any S
ii
reflection measurement:
S
jj
= 0
For any S
ij
transmission measurement:
S
ji =
S
ij
when S
ij
≤ 1
S
ji =
1/S
ij
when S
ij
≥ 1
S
kk
= 0 for all k
Table 3. 85052B Calibration kit
N5230A
• Option 140 or 240 standard test set and standard power range
• Option 145 or 245 configurable test set and extended power range
• Option 146 or 246 configurable test set and extended power range with internal
second source
Applies to the N5230A Option 140/145/146/240/245/246 analyzers, 85052B (3.5mm)
calibration kit, 85131F flexible test port cable set, and a full 4-port calibration. Also applies
to the following condition: Environmental temperature 23° ±3 °C, with < 1 °C deviation
from calibration temperature.
Specification (dB)
Description
10 to 500 MHz to 2 to 8 to 13.5 to
500 MHz 2 GHz 8 GHz 13.5 GHz 20 GHz
Directivity 48 48 44 44 44
Source match 40 40 33 31 31
Load match 48 48 44 44 44
Reflection ±0.003 ±0.003 ±0.003 ±0.006 ±0.006
tracking (+0.01/°C) (+0.01/°C) (+0.02/°C) (+0.03/°C) (+0.03/°C)
Transmission ±0.017 ±0.017 ±0.062 ±0.125 ±0.125
tracking (+0.01/°C) (+0.01/°C) (+0.02/°C) (+0.03/°C) (+0.03/°C)
Transmission uncertainty (specifications)
1. From 300 kHz to 10 MHz, performance is characterized as “typical”. To generate these typical values,
please download our free Uncertainty Calculator from
www.agilent.com/find/na_calculator.
Magnitude
0.01
0.1
1
10
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
N5230A Option 140/145/146/240/245/246 with 85052B
S11 = S22 = 0
Source power = -5 dBm
Uncertainty (dB)
■ 10 to 500 MHz
♦ 500 MHz to 2 GHz
▲ 2 to 8 GHz
● 8 to 20 GHz