Atec Agilent-8722ES - Manual (Page 30)

34
Test port adapter sets
The Agilent 85130 series test port adapter sets
protect the test set port when connecting devices
to the test port. These adapters, listed below with
the single cables, convert the ruggedized test set
port to a connection mateable with the device under
test. Each set contains a male and a female adapter.
Adapter sets
Adapter Connector type Frequency Return loss
set (Test port to device) (DC–f
max
) at f
max
85130C 3.5 mm 1 to type-N DC to 18 GHz ≥28 dB
85130D 3.5 mm 1 to PSC-3.5 mm (f) DC to 26.5 GHz ≥28 dB
or 3.5 mm (m)
85130E 2.4 mm 1 to 7 mm DC to 18 GHz ≥26 dB
85130F 2.4 mm 1 to PSC-3.5 mm (f) DC to 26.5 GHz ≥26 dB
or 3.5 mm (m)
85130G 2.4 mm 1 to PSC-2.4 mm (f) DC to 50 GHz ≥23 dB
or 2.4 mm (m)
Equipment rack systems
Agilent 1181B system testmobile
The 1181B System Testmobile is a unit that provides
mobility for instruments, test systems, and work-
stations. It holds units up to 610 mm (24 inches)
deep. The load capacity is up to 90 kg (200 lbs) on
the tilt tray and 227 kg (500 lb) total. The following
accessories are available for the test mobile:
• 35181E anti-static work mat
• 92199B power strip for US and Canada
• 92199E international power strip (IEC-320)
Accessories, continued
1. Special rugged female connector specifically for connecting to the network
analyzer test port. Does not mate with a standard male connector.