Atec Agilent-8722ES - Manual (Page 16)

20
Full frequency band sweep time (ms) 1
Number of Points
Measurement 51 201 401 1601
(Swept mode/Stepped mode)
Single band sweep (10 to 12 GHz)
Uncorrected 27 / 134 65 / 492 116 / 970 419 / 3836
One-port calibration 2 27 / 134 65 / 492 116 / 970 419 / 3836
Two-port calibration 3 80 / 492 158 / 1034 259 / 2010 866 / 7885
8719E full sweep (0.05 to 13.5 GHz)
Uncorrected 484 / 597 553 / 1014 614 / 1490 926 / 4336
One-port calibration 2 484 / 597 553 / 1014 614 / 1490 926 / 4336
Two-port calibration 3 996 / 1222 1133 / 2069 1259 / 3057 1876 / 8892
8720E full sweep (0.05 to 20 GHz)
Uncorrected 449 / 581 538 / 1017 598 / 1490 900 / 4335
One-port calibration 2 449 / 581 538 / 1017 598 / 1490 900 / 4335
Two-port calibration 3 930 / 1192 1106 / 2172 1227 3053 1826 / 8892
8722E full sweep (0.05 to 40 GHz)
Uncorrected 570 / 731 651 / 1162 707 / 1690 961 / 4519
One-port calibration 2 570 / 731 651 / 1162 707 / 1690 961 / 4519
Two-port calibration 3 1168 / 1162 1333 / 2367 1444 / 3439 1949 / 9269
Time-domain conversion 4 13 42 87 380
15 41 81 350
GPIB data transfer 5
Binary (Internal) 35 15 20 54
IEEE754 floating point format
32 bit
11 18 26 78
64 bit 13 24 40 134
ASCII 33 105 203 781
Measurement throughput summary
1. All values are typical.
2. S11 one-port calibration, with a 6 kHz IF bandwidth. Includes system retrace time. time-domain gating is assumed off.
3. S21 measurement with full two-port calibration, using a 6 kHz IF bandwidth. Includes system retrace time and RF switching time.
Time-domain gating is assumed off.
4. Option 010 only, gating and error-correction are off. Does not include sweep time.
5. Measured with an HP Omnibook 7100 266 PentiumII computer.