Atec Agilent-8722ES - Manual (Page 10)

Agilent 8719ET and 8720ET
with 3.5 mm test ports
Standard or Option 004
Calibration kit: 85052B 3.5-mm with sliding loads
Cables: 85131F 3.5-mm flexible cable set
IF bandwidth: 10 Hz
Averaging: None (8 during isolation calibration)
System dynamic range
0.05 to 0.84 GHz 102 dB
0.84 to 20 GHz 104 dB
Power range:
Standard:
–10 to +10 dBm
Option 004: –65 to +10 dBm
14
System performance, continued
Magnitude Phase
Measurement uncertainty
Reflection measurements
Magnitude Phase
Magnitude Phase
1. One-port or enhanced-response calibration
2. Enhanced-response or response-only calibration
3. Option 004 may degrade uncorrected source match as much as 2 dB.
Transmission measurements
Corrected measurement port specifications (3.5 mm)
Frequency range (GHz)
0.050 to 0.5 0.5 to 2 2 to 8 8 to 20
Reflection Measurements 1
Directivity 48 dB 48 dB 44 dB 44 dB
Source match 40 dB 40 dB 33 dB 31 dB
Load match
One-port Cal 22 dB 22 dB 22 dB 17 dB
Enhanced Reflection Cal 22 dB 22 dB 22 dB 17 dB
Reflection tracking ±(0.006 dB ±(0.006 dB ±(0.006 dB ±(0.008 dB
+0.02 dB/°C) +0.03 dB/°C) +0.03 dB/°C) +0.04 dB/°C)
Transmission measurements 2
Source match
Enhanced Response Cal 40 dB 40 dB 33 dB 31 dB
Response Only Cal 16 dB 20 dB 14 dB 11 dB
Transmission tracking
Enhanced Response Cal ±(0.014 dB ±(0.012 dB ±(0.027 dB ±(0.050 dB
+0.02 dB/°C) +0.03 dB/°C) +0.03 dB/°C) +0.04 dB/°C)
Response Only Cal ±(0.109 dB ±(0.069 dB ±(0.137 dB ±(0.339 dB
+0.02 dB/°C) +0.03 dB/°C) +0.03 dB/°C) +0.04 dB/°C)
Load match 22 dB 22 dB 22 dB 17 dB