Atec Agilent-8722ES - Manual (Page 27)

31
A wide range of accessories support the Agilent
8720E family of network analyzers, including cali-
bration kits, verification kits, cables, and adapters
in 7 mm, 3.5 mm, 7-16, Type-N, and 2.4 mm coax
and in the standard waveguide bands. The standards
used in the 3.5 mm, Type-N, and 2.4 mm calibration
and verification kits use precision slotless connec-
tors (PSC-3.5, PSC-N, and PSC-2.4).
Calibration kits
Vector accuracy enhancement procedures require
that the systematic errors of the measurement sys-
tem be characterized by measuring known devices
(standards) on the system over the frequency range
of interest. Agilent offers the following types of
calibration kits:
Standard calibration kits
Standard kits contain open circuits, short circuits,
and both fixed and sliding terminations in both
sexes for all connector types (except 7 mm, a sex-
less connector), connector gauges are included in
these kits for maintaining each standard’s connec-
tor interface. Standard calibration kits that include
RTL adapters and devices are also available in 7-mm
and 3.5-mm connectors.
Precision calibration kits
Precision kits have precision 50 Ω airline(s) for
performing the Thru-Reflect-Line (TRL) calibration.
These kits also contain the open circuit, short cir-
cuit, and fixed terminations used for traditional
open-short-load calibration techniques.
Accessories
Calibration kits
Frequency Return ResiduaI ResiduaI
Cal kit type range (GHz) Connector Return loss, Return loss, loss, airline directivity 2 source match 2
and name f
min
–f
max
type fixed load sliding load at f
max
at f
max
at f
max
Precision
85052C
0.045 to 26.5 3.5 mm ≥46 dB, DC to 2 GHz — 50 dB 50 dB 50 dB
Standard
85050B
0.045 to 18 7 mm ≥52 dB, DC to 2 GHz ≥52 dB, 2 to 18 GHz — 45 dB 30 dB
85052B 0.045 to 26.5 3.5 mm ≥44 dB, DC to 3 GHz ≥44 dB, 3 to 26.5 GHz — 44 dB 30 dB
85054B 0.045 to 18 Type-N ≥48 dB, DC to 2 GHz ≥42 dB, 2 to 18 GHz — 42 dB 30 dB
85056A 0.045 to 50 2.4 mm ≥42 dB, DC to 4 GHz ≥36 dB at 50 GHz — 38 dB 31 dB
Economy
85050D
0.045 to 18 7 mm ≥38 dB, DC to 18 GHz — — 36 dB 30 dB
85052D 0.045 to 26.5 3.5 mm ≥30 dB at 26.5 GHz — — 36 dB 29 dB
85054D 0.045 to 18 Type-N ≥34 dB at 18 GHz — — 34 dB 28 dB
85056D 0.045 to 50 2.4 mm ≥26 dB at 50 GHz — — 26 dB 23 dB
85056K 0.045 to 40 2.92 mm ≥26 dB at 40 GHz — — 25 dB 22 dB
Waveguide
X11644A
1 8.2 to 12.4 WR-90 ≥42 dB, 8.2 to 12.4 GHz 50 dB 40 dB 30 dB
P11644A 1 12.4 to 18 WR-62 ≥42 dB,12.4 to 18 GHz 50 dB 40 dB 30 dB
K11644A 1 18 to 26.5 WR-42 ≥42 dB,18 to 26.5 GHz 50 dB 40 dB 30 dB
R11644A 26.5 to 40 WR-28 — 46 dB 50 dB 40 dB 30 dB
Electronic
85060B
3 1 to 18 7 mm — — — 46 dB 40 dB
Option 001 30 kHz to 9 7 mm — — — 45 dB 34 dB
85062B 3 1 to 26.5 3.5 mm — — — 44 dB 37 dB
Option 001 30 kHz to 9 3.5 mm — — — 45 dB 34 dB
85064B 3 1 to 26.5 Type-N — — — 46 dB 40 dB
Option 001 30 kHz to 9 Type-N — — — 47 dB 34 dB
1. Airline return loss, directivity, and source match are typical values for these calibration kits.
2. Residuals based on 8720E at f
max
= 20 GHz for 3.5 mm kits or on 8722E at f
max
= 40 GHz for 2.4 mm kits.
3. Requires an 85097A ECal interface unit.