Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 - Manual (Page 134)

A p p e n d i x A
Antex Electronics Corporation Antex StudioCard A-3
General
Characteristics
The general characteristics of the Antex StudioCard are as
follows:
Dimensions 7.2L x 3.74H inches
Weight 7 ounces
Operating
Temp 0° C to 70° C
Power 1A @ +5V,
300 mA @ +12V,
70mA @-12V
Analog Signal
Quality
Listed below are the specifications for analog signal quality.
A/D Conversion 20-bit, 64-times oversampling, fourth order sigma delta
Crosstalk -88 dB @ 1 kHz, input to output
D/A Conversion 20-bit, 128-times oversampling, third order sigma delta
Dynamic Range 98 dB typical from 20 - 20 kHz, input to output, A
weighted
94 dB minimum from 20 - 20 kHz, input to output, A
weighted
Frequency
Response 20 Hz - 20 kHz, ±0.5 dB, input to output
Measurement
conditions 48 kHz sample rate
-1.0 dB full scale signal amplitude
22 - 22 kHz measurement bandwidth on an Audio
Precision System Two
THD+N 0.003% typical at 1 kHz, input or output, A weighted
0.005% maximum at 1 kHz, input or output, A weighted