Alpha Technologies FXM 650, 1100, 2000 UPS - Manual (Page 30)

017-230-B4 Rev B 28
6.2.4 Making Measurements
The System Status menu lets you make measurements of various Alpha FXM inputs, outputs, temperatures and
other values.
Procedure
1. From the Logo screen go to the System Status menu.
2. Press the SELECT button to enter the submenu (Table E).
3. Press the SCROLL button to move between items in the submenu. Stop at the item you want to measure. The
measurement is displayed on the LCD and automatically updated every 0.5 second.
Table C — System Status Menu
LCD display Meaning Description
VIN Input Voltage Line input voltage into the Alpha FXM
VOUT Output Voltage Alpha FXM output voltage (true RMS)
IOUT AC
Output Current
(AC)
Alpha FXM AC output current (true RMS)
BATT TEMP
Battery
Temperature
Battery temperature (°C)
FREQ IN Input Frequency Frequency of line power into the Alpha FXM (Hz)
OUTPUT PWR Output Power Alpha FXM output power in VA (true RMS)
BATT VOLT Battery Voltage Battery output voltage (Vdc)
CHGR CUR Charger Current Alpha FXM battery charging current (Amps)
DATE Current date Displays in the format set by the user
TIME Current time Displays in the format set by the user
INV COUNT # of line failures
Shows how many times the inverter has been active since the last time the
inverter counter was cleared. See INV RECORD description in Table B.
INV (min)
Amount of time
inverter was on
Shows total time in minutes the inverter has been active since the last time the
inverter timer was cleared. See INV RECORD description in Table B.
BUCK/BOOST
Buck/Boost
count
Number of times FXM goes into Buck and Boost mode
SHED TIMER1
Amount of time
(in seconds) until
the dry contact is
activated.
The factory default dry contact for this setting is contact C4. SHED TIMER2 and
SHED TIMER3 can be field programmed. The factory default setting is 2 hours,
To change the setting see "UPS Maintenance > Relay & Load Shed" on page
41.
SHED TIMER2
SHED TIMER3
MAC Address FXM MAC FXM MAC address
IP Address FXM IP FXM IP
kWh kWh Meter Accumulated output energy
Remain Tm
Remaining
Battery Runtime
Remaining runtime of the battery (standard charging method)
Serial Number
Unit Serial
Number
Unit serial number of the Alpha FXM
VERSION Software Version Software version used in this Alpha FXM