Remote operation – Extron Electronics MVX 44_48_84_88 Series User Guide User Manual
Page 47
Command/Response Table for SIS Commands (continued)
Command Function
ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Save, recall, and directly write global presets
Save current configuration as a
global preset
X(
,
Spr
X(]
Command character is a comma.
Example:
8,
Spr08
]
Save current ties as preset 8.
Recall a global preset
X(
.
Rpr
X(]
Command character is a period.
Example:
5.
Rpr05
]
Recall preset 5, which becomes the
current configuration.
Directly write a global preset
E
*
X(
P
X!
*
X@
!
X!
*
X@
%
X!
*
X@
$ ...
X!
*
X@
&
}
Enter as many ties as are valid for
this model. The tie all (!), both tie
RGB (& and %), and the tie audio ($)
commands are all valid.
Spr
X(]
Example:
*16P08*5!07*04%3*6$3*8&
Esc
Brackets are shown to separate ties for
clarity only. Create global preset 16,
which ties video and audio input 8 to
output 5, RGBHV input 7 to output 4,
audio input 3 to output 6, and RGBHV
input 3 to output 8.
Spr16
]
View global preset configuration
EX(
1VC
}
X!
1
•
X!
2
•
X!
3
•...•
X!
n
•Vid•
X!
1
•
X!
2
•
X!
3
•...•
X!
n
•Aud
]
Show the video and audio configuration
for preset
X(
. Show the video input
tied to n sequential outputs and then
the audio input tied to n sequential
outputs. n is the highest output
number for this model switcher.
Response description:
Video input # (I#) tied to output #1 (O#1)•I# tied to O#2•I# tied to O#3•I# tied to O#n•Vid•
Audio input # (I#) tied to output #1 (O#1)•I# tied to O#2•I# tied to O#3•I# tied to O#n•Aud
]
Example (MVX 88 VGA):
E
4VC
}
6•5•6•8•3•3•1•0•Vid•8•1•1•1•8•8•8•8•Aud
1
Output:
Response = tied input:
Input 5 video tied to output 2
2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
No tied input Audio input 8 tied to output 5
Each position shown in the response is an output: left = output 1 , right = output 8. The number in
each position is the input tied to that output.
Video — Input 6 is tied to outputs 1 and 3; input 5 to output 2; input 8 to output 4;
input 3 to outputs 5 and 6; and input 1 to output 7. No input is tied to output 8.
Audio — Input 8 is tied to outputs 1 and outputs 5 through 8; input 1 to outputs 2 through 4.
Example (MVX 44 VGA)
E
4VC
}
Output:
Response = tied input:
Input 1 tied to output 2
1•1•0•2•Vid•1•1•0•1•Aud
1 2 3 4
1 2 3 4
NOTE
:
E
0VC
}
returns the current video and audio configuration of the switcher.
NOTE:
X!
= Input number (for tie)
0 (untie) – maximum number of inputs
X@
= Output number
1 through 4 (MVX 44, MVX 84) or 1 through 8 (MVX 48, MVX 88)
X(
= Preset number
00 through 16 (00 = current configuration)
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation
41