Extron Electronics MVX 44_48_84_88 Series User Guide - Manual (Page 10)

Installation
This sections details the installation of the MVX VGA Matrix Switchers, including:
• Mounting the Switcher
• Cabling and Rear Panel Views
Mounting the Switcher
CAUTION: Installation and service must be performed by authorized personnel only.
Detailed mounting instructions can be found in the “Reference Information“ section
at the end of this guide. The 1U high matrix switchers can be placed on a tabletop or
mounted on a rack shelf . Use the included hardware for rack mounting.
Cabling and Rear Panel Views
All connectors are on the rear panel. Depending on the model, the switcher can have up to
eight high resolution video and stereo audio inputs and eight video and audio outputs.
Figure 2 shows an MVX 88 VGA A video and audio switcher. Other switcher models are
housed in the same 1U enclosures, but have fewer input connectors, output connectors, or
both to accommodate the different matrix sizes that they provide.
100-240V 0.3A
50-60Hz
MVX 88 VGA A
RS-232
OUTPUTS
L R 7
L R 8
L R 5
L R 6
L R 3
L R 4
L R 1
L R 2
C U S LISTED 1T23 I.T.E.
1
2
3
4
INPUTS 5
6
7
8
1
2
3
4
OUTPUTS
3
4
5
6
7
8
5 4 1 2 3
Figure 2. MVX 88 VGA A High Resolution Video Matrix Switcher
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Installation 4