beautypg.com

Indicators. see, Item j, Item k – Extron Electronics MVX 44_48_84_88 Series User Guide User Manual

Page 17: Item i, Lights. in audio setup

background image

i

Audio Setup LED — The Audio Setup LED lights red to indicate that the switcher

is in Audio Setup mode. See “

Adjusting Input Audio Gain and Attenuation

” on

page 23.
Alternate IR error function — The Audio Setup LED also indicates errors when you
use an IR 501 small matrix remote control. The LED lights for approximately 1 second
when the switcher receives an unexpected or out-of-sequence IR command from the
remote control. The switcher otherwise ignores the command.

j

Down (<) button and LED — The < button decreases the audio gain for a selected

input. Press and release the button to decrease the gain by 1 dB or press and hold the
button to decrease the gain by 3 dB per second until the button is released or the lower
limit is reached.

NOTES:

On 4-output switchers, this button and LED stand alone.

On 8-output switchers, this button and LED are secondary functions of

the Output 7 button and LED.

The < LED flashes once in Audio Setup mode to indicate each 1 dB decrease in the input
audio gain. See “

Adjusting Input Audio Gain and Attenuation

” on page 23.

The < LED lights steadily in Audio Setup mode to indicate that the adjustment has
reached the maximum attenuation (-18 dB).

k

Up (>) button and LED — The > button increases the gain for a selected input. Press

and release the button to increase the audio level by 1 dB or press and hold the button
to increase the audio level by 3 dB per second until the button is released or the upper
limit is reached.

NOTES:

On 4-output switchers, this button and LED stand alone.

On 8-output switchers, this button and LED are secondary functions of

the Output 8 button and LED.

The > LED flashes once in Audio Setup mode to indicate each 1 dB increase in the input
audio gain. See “

Adjusting Input Audio Gain and Attenuation

” on page 23.

The > LED lights steadily in Audio Setup mode to indicate that the adjustment has
reached the maximum gain (+10 dB).

MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation

11