Extron Electronics MVX 44_48_84_88 Series User Guide - Manual (Page 28)

Example 7: Recall a preset
The following steps show an example in which a preset is recalled to become the current
configuration. The example shows the front panel indications that result from your actions.
1. Select Recall Preset mode: Press and release the Preset button.
PRESET
2 1 4 3
OUTPUTS
2 4 1
INPUTS
3
Press and release the button.
The LED lights to indicate Recall Preset mode.
2 3 4 5 6 7 8 1
All input and output buttons with assigned presets light. If you then recall the configuration
from an
unlit preset number, all ties will be cleared.
Preset:
2. Select the preset: Press and release the input button or output button for the desired
preset.
2 1 3
2 1
INPUTS
3 PRESET 3 4
OUTPUTS
Press and release the Input 1 button to select preset 1.
Preset 2 Preset 3
The LED for the recalled preset and the Preset LED
remain lit for 1 second then go out.
All LEDs except the recalled preset's LED go out.
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation 22