YSI MultiLab 4010P-1 - Manual (Page 85)

MultiLab 4010-1 Printer (only MultiLab 4010P-1)
ba76141e03 03/2014 85
12.5 What to do if... / printer
Integrated printer
does not print
Printer operating -
paper not being
printed
Integrated printer
prints automatically
Cause Remedy
– Printer switched off
(LED flashing)
– Switch on the printer
(LED illuminated)
– No power pack connected – Connect the power pack
– USB cable connected – Disconnect the USB cable from the
meter
– Function "automatic storing at
intervals" with long intervals is
switched on
– Switch off the function (see section
10.2 A UTOMATIC DATA STORAGE AT
INTERVALS , page 74)
– No paper available – Insert a roll of paper
Cause Remedy
– Paper inserted the wrong way up – Turn the roll of paper around and
insert it with the other side upwards
Cause Remedy
– The function "Automatic storage
at intervals" or "Transmit data
automatic at intervals" is
switched on
– Switch off the function (see section
10.2 A UTOMATIC DATA STORAGE AT
INTERVALS
, page 74 or
section 11.4 O PTIONS FOR DATA
TRANSMISSION TO A PC, page 80)