YSI MultiLab 4010P-1 - Manual (Page 22)

Operation MultiLab 4010-1
22 ba76141e03 03/2014
4.5 Navigation
4.5.1 Operating modes
4.5.2 Measured value display
In the measured value display, you can

open the menu for calibration and measurement settings with
 open the Storage & config system menu with the sensor-independent set-
tings by pressing
 change the display in the selected measuring screen (e. g. pH ><− mV) by
pressing .
4.5.3 Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
The selection is made with the <><> keys. The current selection is dis-
played with a frame.

Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with
Operating
mode Description
Measuring The measurement data of the connected sensor are
shown in the measured value display
Calibration The course of a calibration with calibration information,
functions and settings is displayed
Storing in
memory The meter stores measuring data automatically or manu-
ally
Transmit-
ting data The meter transmits measuring data and calibration
records to a USB-B interface automatically or manually.
Setting The system menu or a sensor menu with submenus, set-
tings and functions is displayed