YSI MultiLab 4010P-1 - Manual (Page 21)

MultiLab 4010-1 Operation
ba76141e03 03/2014 21
Changing the
password
If the administrator has set up the access with password protection:
Forgotten the
password?
Contact the administrator.
The login is done immediately if no password is required. If a
sensor is connected the measured value display appears.
4. If a password is required:
Using <><>, select the menu item, Password and confirm with
The user specifies the password when he or she first logs in with a
user name.
A valid password consists of 4 digits.
The user can change the password with the next login.
5. Change the digit of the highlighted position with <><>.
Go to the next digit of the password with /[].
When the password was completely entered, confirm with
1. Switch the meter on with .
The Login dialog appears.
2. Using <><>, select the menu item, User name and confirm with
3. Using <><>, select a user name and confirm with
4. Using <><>, select the menu item, Change password and confirm
with
5. In the Password field, enter the old password with <><> and /
[]and confirm it with
6. In the New password field, enter the new password with <><> and
/[]and confirm it with