YSI MultiLab 4010P-1 - Manual (Page 37)

MultiLab 4010-1 pH value
ba76141e03 03/2014 37
5.2.6 Calibration data
Displaying the
calibration data
The calibration record of the last calibration is to be found under the menu item,
Calibration / Calibration record. To open it in the measured value display, press
the key.
The calibration records of the last 10 calibrations are to be found in the menu,
Calibration / Calibration data storage / Display. To open the Calibration menu,
press the
The calibration record is automatically transmitted to the interface
after calibrating.
Menu item Setting/func-
tion Description
Calibration /
Calibration data stor-
age /Display - Displays the calibration records.
Further options:

Scroll through the calibration
records with <><>.
 Output the displayed calibration
record to the interface with
/[USB output].
 Output all calibration records to
the interface with [USB
output].
 Quit the display with /
[Back] or
 Switch directly to the measured
value display with .
Calibration /
Calibration data stor-
age /
Output to RS232/USB - Outputs the calibration data stor-
age to the interface