2 enter sensor cap coefficients, 3 do % saturation local, Enter senso – YSI MultiLab 4010P-1 User Manual
Page 65: Do % satura, Ails, see section 9.3.2 e, Nter, Ensor, Coefficients, Ails, see section 9.3.3 do % s, Aturation
MultiLab 4010-1
Settings
ba76141e03
03/2014
65
9.3.2 Enter Sensor cap coefficients
9.3.3 DO % Saturation local
Irrespective of the height or air pressure, the calibration value is set to 100%.
DO % Saturation local is ideal for EU compliance.
When DO % Saturation local is enabled, an L will appear next to D.O.% on the
display.
D.O. mg/L readings are unaffected by the selection of DO % Saturation local.
The values of the coefficients are provided with the sensor cap.
1.
Change the digit of the highlighted position with <><>.
2.
Go to the next position with <><>.
3.
Confirm with
This manual is related to the following products: