YSI MultiLab 4010P-1 - Manual (Page 67)

MultiLab 4010-1 Settings
ba76141e03 03/2014 67
Setting menu of
4320
Temp. comp. (TC) /
Linear coeff. 0.000 ...
2.000 ...
3.000 %/K Coefficient of the linear temperature
compensation.
This menu item is only available when
the linear temperature compensation
is set.
Temp. comp. (TC) /
Reference temp. 20 °C
25 °C Reference temperature
This setting is only available for the
measured parameters, conductivity
(
ϰ
) and resistivity (
ρ)
.
Multiplier for TDS 0.40 ...
1.00 Multiplier for TDS value
Reset - Resets all sensor settings to the deliv-
ery condition (see section 9.6.1
R
ESETTING THE MEASUREMENT SET -
TINGS , page 70).
Menu item Possible
setting Description
Menu item Possible
setting Description
Cell constant 0.090 ... ...
0.100 ...
0.110 cm
-1
Display and setting options for the
cell constant
Temp. comp. (TC) /
Method nLF
Lin
off Procedure for temperature compen-
sation (see section 8.2 T
EMPERA
-
TURE COMPENSATION , page 55).
This setting is only available for the
measured parameters, conductivity
(
ϰ
) and resistivity (
ρ)
.
Temp. comp. (TC) /
Linear coeff. 0.000 ...
2.000 ...
3.000 %/K Coefficient of the linear temperature
compensation.
This menu item is only available
when the linear temperature com-
pensation is set.
Temp. comp. (TC) /
Reference temp. 20 °C
25 °C Reference temperature
This setting is only available for the
measured parameters, conductivity
(
ϰ
) and resistivity (
ρ)
.
Multiplier for TDS 0.40 ... 1.00 Multiplier for TDS value
Reset - Resets all sensor settings to the
delivery condition (see section 9.6.1
R
ESETTING THE MEASUREMENT SET -
TINGS , page 70).