YSI MultiLab 4010P-1 - Manual (Page 15)

MultiLab 4010-1 Commissioning
ba76141e03 03/2014 15
3.3.2 Connecting the power pack
3.3.3 Mounting the stand
The stand base can be mounted at the right side of the meter.
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see section 15.2
G
ENERAL DATA
, page 92).
CAUTION
Use original power packs only (see section 15.2 G ENERAL DATA ,
page 92).
1. Connect the plug of the power pack to the socket for the power pack on
the MultiLab 4010-1.
2. Connect the original power pack to an easily accessible power outlet.
1
2