YSI MultiLab 4010P-1 - Manual (Page 13)

MultiLab 4010-1 Commissioning
ba76141e03 03/2014 13
3 Commissioning
3.1 Scope of delivery
 Meter MultiLab 4010-1 / MultiLab 4010P-1
 4 batteries 1.5 V Mignon type AA
 Power pack
 USB cable (A plug on mini B plug)
 Stand
 Stand holder
 Comprehensive operating manual
 Short instructions
 CD-ROM with
– USB drivers
– comprehensive operating manual
– software MultiLab User
– software MultiLab Importer
3.2 Power supply
The MultiLab 4010-1 is supplied with power in the following ways:

Mains operation with the supplied power pack
 Battery operation (4 batteries, 1.5 V Mignon type AA)
 USB operation via a connected USB-B cable
3.3 Initial commissioning
Perform the following activities:

Insert the supplied batteries
 For mains operation: Connect the power pack
 If necessary, mount the stand
 Switch on the meter (see section 4.2 S
WITCHING ON THE METER
, page 19)
 Set the date and time (see section 4.5.5 E XAMPLE 2 ON NAVIGATION : S ETTING
THE DATE AND TIME , page 26)