YSI DIQ/S 182 XT-4-PR - Manual (Page 70)

Operation System 182 XT-4
4 - 4 ba76027e01 02/2012
4.3 Working with the SETTINGS menu
Note
All settings in the SETTINGS menu can be protected by a password
against unauthorized changing. For more detailed information on
password protection, see section 4.6.
4.3.1 Selection menus
Pressing
S
switches from the measured value display to the
SETTINGS menu (main menu).
Fig. 4-2 SETTINGS menu (main menu)
Operating notes
 In the main menu, the lock symbol shows the current safety level for
the settings
–
a
Settings not protected by password
–
z
Settings protected by password (reading possible only)
For more detailed information on password protection, see
section 4.6.
 The arrows 8/2 appear automatically if further display contents are
above or below the visible display range.
 The toggle switch w
is used to highlight a menu item (displayed in
reverse video) and move the visible display range up or down.
 To open a menu item, highlight it and press g
. The display
switches to a further submenu or to a setting table.
 To return to the measured value display, press m
or
e
.