YSI DIQ/S 182 XT-4-PR - Manual (Page 28)

Installation System 182 XT-4
3 - 14 ba76027e01 02/2012
Stacking the
MIQ modules
Fig. 3-5 Stacking the MIQ modules (variant 1)
Fig. 3-6 Closing the enclosure (variant 1)
7 Attach the prepared DIQ/S 182 XT-4-PR to the cover of the
MIQ module. At the same time, ensure that the two clips on the
DIQ/S 182 XT-4-PR click into place in the lid of the
MIQ module. Subsequently, tighten the two screws (pos. 8 in
Fig. 3-4).
8 Close the cover of the DIQ/S 182 XT-4-PR and fix it in place
with the two countersunk bolts (pos. 7 in Fig. 3-6).
MIQ module
DIQ/S 182 XT-4-PR
7
MIQ module
DIQ/S 182 XT-4-PR