YSI DIQ/S 182 XT-4-PR - Manual (Page 68)

Operation System 182 XT-4
4 - 2 ba76027e01 02/2012
4.2 Measured value and status display
The
m
key switches to the last selected measured value and status
display from any operating situation. Entries that are not completed are
ignored while doing so.
Pressing
m
once again cyclically switches between further display
options.
Example:
Display options
with four connected
sensors
Operating notes
 If more sensors are connected than can be shown in the respective
display option, the display changes its contents accordingly in
3-second intervals.
 Select a sensor in the double display with w
. The selected sensor
is displayed in reverse video. The number and name of the selected
sensor are displayed in the header. In the single display, the sensor
that is shown is always also the selected sensor.
 Start a calibration procedure for the selected sensor with c
.
Starting a calibration procedure from the display of interfaces is not
possible.
Double display of measured
values, large:
Main measured parameter only.
Double display of measured
values, detail:
Main and secondary measured
parameter.
Single display, measured value.
Display of the interfaces.
Either:
Date and time and the current
states of the relays.
Or (switchable with
w
):
State of the PROFIBUS
communication.