YSI DIQ/S 182 XT-4-PR - Manual (Page 12)

Safety instructions System 182 XT-4
2 - 2 ba76027e01 02/2012
Special user
qualifications
The following installation activities may only be performed by a
qualified electrician:
 Connection of the DIQ/S 182 XT-4-PR or an additional MIQ power
supply module to the power supply.
 Connection of external, line voltage-carrying circuits to relay
contacts.
2.2 Authorized use
The authorized use of the System 182 XT-4 consists only of its use in
online analysis.
Please observe the technical specifications according to chapter 10
T
ECHNICAL DATA . Only operation and running according to the
instructions in this component operating manual is authorized.
Any other use is considered to be unauthorized. Unauthorized use
invalidates any claims with regard to the guarantee.
2.3 General safety instructions
All components of the System 182 XT-4 are constructed and inspected
in accordance with the relevant guidelines and norms for electronic
instruments (see chapter 10 T
ECHNICAL DATA ).
They left the factory in a safe and secure technical condition.
Function and
operational safety
The fault-free functioning and operational safety of the System 182 XT-
4 components are only guaranteed if the generally applicable safety
measures and the special safety instructions in this operating manual
are followed during their use.
The fault-free functioning and operational safety of the System 182 XT-
4 components are only guaranteed under the environmental conditions
specified in chapter 10 T
ECHNICAL DATA .
If components of the System 182 XT-4 are transported from a cold
environment into a warm environment, this can cause a malfunction
through the formation of condensation. In this case, wait for the
components to adjust to room temperature before recommissioning.