YSI DIQ/S 182 XT-4-PR - Manual (Page 27)

System 182 XT-4 Installation
3 - 13 ba76027e01 02/2012
Note
Only use the plastic tapping screws supplied for attaching the contact
base. They ensure the correct fit.
Premounting the ISO
blind nuts
Fig. 3-4 Premounting the ISO blind nuts (variant 1)
4 Fix the contact base (pos. 5 in Fig. 3-3) onto the DIQ/S 182 XT-
4-PR with the two plastic self-tapping screws (pos. 6).
5 Remove the two countersunk screws (pos. 7 in Fig. 3-3) of the
DIQ/S 182 XT-4-PR and swing open the lid.
6 Insert the cheese-head screws (pos. 8 in Fig. 3-4) with the
plastic washers in the drilled mounting holes in the enclosure
and loosely screw in the ISO blind nuts (pos. 9).
9
8
DIQ/S 182 XT-4-PR