YSI DIQ/S 182 XT-4-PR - Manual (Page 151)

System 182 XT-4 Accessories and options
12 - 1 ba76027e01 02/2012
12 Accessories and options
Note
Other accessories for the IQ S
ENSOR N ET system are given in the YSI
catalog or on the Internet.
Description Model Order no.
IQ S ENSOR N ET cable - please specify the
required length in m with your order
SNCIQ
SNCIQ/UG
480 046Y
480 047Y
IQ sensor connection cable
– 1.5 m
– 7.0 m
– 15.0 m
– Special length up to max. 100 m
– 20 m (seawater version)
– 25 m (seawater version)
– 50 m (seawater version)
– 75 m (seawater version)
– 100 m (seawater version)
– Special length (seawater version)
SACIQ-1.5
SACIQ-7.0
SACIQ-15.0
SACIQ-SO
SACIQ-20.0 SW
SACIQ-25.0 SW
SACIQ-50.0 SW
SACIQ-75.0 SW
SACIQ-SO SW
SACIQ-SO SW
480 040Y
480 042Y
480 044Y
480 041VY
480 045Y
480 066Y
480 060Y
480 067Y
480 062Y
480 064VY
Set with four cable glands for cable sheath
diameter of 7 to 13 mm EW/1 480 051Y
Branching module DIQ/JB 472 005Y
Valve module DIQ/CHV 472 007Y
Set for mounting of one or two DIQ modules to
a YSI mounting stand MS/DIQ 472 009Y
Sun shield for the DIQ/S 182 XT-4-PR SSH/IQ 109 295Y
Set for wall mounting of the DIQ/S 182 XT-4-
PR or an MIQ module WMS/IQ 480 052Y
Set for panel mounting of the DIQ/S 182 XT-
4-PR or an MIQ module;
switch panel aperture 138 x 138 mm
according to DIN 43700 or IEC 473
(max. thickness 15 mm) PMS/IQ 480 048Y
Set for mounting of the DIQ/S 182 XT-4-PR or
an MIQ module on a 35 mm top hat rail
according to EN 50022 THS/IQ 480 050Y