YSI 5200 - Manual (Page 42)

YSI Incorporated 40 5200 Recirculating System Monitor
Range High
From the Set Point menu (with the Range High option displayed), press the Enter [ ] key.
R a n g e H i g h
0 7 8 . 8 ° F
Using the [e], [f] and Enter [ ] keys, enter the Range High value.
NOTE: The Range High value must be higher than the Set Point.
R a n g e H i g h
0 7 4 . 0 ° F
Press the Enter [ ] key. The display returns to the Set Point Menu.
E n t e r t o S e l e c t
R a n g e H i g h
Press the [f] key for the next Set Point selection, Alarm Low.
Alarm Low
From the Set Point menu (with the Alarm Low option displayed), press the Enter [ ] key.
A l a r m L o w
0 6 8 . 8 ° F
Using the [e], [f] and Enter [ ] keys, enter the Alarm Low value.
NOTE: The Alarm Low value must be lower than the Range Low.
A l a r m L o w
0 6 2 . 0 ° F
Press the Enter [ ] key. The display returns to the Set Point Menu.
E n t e r t o S e l e c t
A l a r m L o w
Press the [f] key for the next Set Point selection, Alarm High.
Alarm High
From the Set Point menu (with the Alarm High option displayed), press the Enter [ ] key.
A l a r m H i g h
0 7 9 . 7 ° F
Using the [e], [f] and Enter [ ] keys, enter the Alarm High value.
NOTE: The Alarm High value must be higher than the Range High.
A l a r m H i g h
0 8 5 . 0 ° F
Press the Enter [ ] key. The display returns to the Temp System Menu.