Asus NCCH-DLE User Manual

Page 48

2 - 2 8

C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n

4 .

I D E c o n n e c t o r s ( 4 0 - 1 p i n P R I _ I D E [ b l u e ] , S E C _ I D E [ w h i t e )

This connector supports the provided UltraDMA/100/66 IDE hard disk
ribbon cable. Connect the cable’s blue connector to the primary
(recommended) or secondary IDE connector, then connect the gray
connector to the UltraDMA/100/66 slave device (hard disk drive) and
the black connector to the UltraDMA/100/66 master device.

•

Refer to the hard disk drive label or documentation when setting the
device as master or slave.

•

Pin 20 on each IDE connector is removed to match the covered hole
on the UltraDMA cable connector. This prevents incorrect orientation
when you connect the cables.

5 .

G A M E / M I D I c o n n e c t o r ( 1 6 - 1 p i n G A M E 1 )

This connector supports a GAME/MIDI module. Connect the GAME/MIDI
cable to this connector. The GAME/MIDI port on the module connects
a joystick or a game pad for playing games, and MIDI devices for
playing or editing audio files.

NCCH-DLE

NCCH-DLE IDE connectors

NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.

PRI_IDE

SEC_IDE

NCCH-DLE

GAME1

+5V

J2B1

J2CX

MIDI_OUT

J2CY

J2B2

MIDI_IN

+5V

J1B1

J1CX

GND

J1CY

J1B2

+5V

NCCH-DLE Game connector