Asus NCCH-DLE - Manual (Page 100)

4 - 3 8 4 - 3 8 4 - 3 8 4 - 3 8 4 - 3 8 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
Resume by Alarm [Disabled] Resume by Alarm [Disabled] Resume by Alarm [Disabled] Resume by Alarm [Disabled] Resume by Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. Enabling this
item lets you set the date and time of alarm using the two following items.
Configuration options: [Disabled] [Enabled]
Date (of Month) Alarm [0] Date (of Month) Alarm [0] Date (of Month) Alarm [0] Date (of Month) Alarm [0] Date (of Month) Alarm [0]
To set the date of alarm, highlight this item and press to display a
pop-up menu. Key-in a value within the specified range then press .
Configuration options: [Min=0] [Max=31]
Time (hh:mm:ss) Alarm [0 : 0 : 0] Time (hh:mm:ss) Alarm [0 : 0 : 0] Time (hh:mm:ss) Alarm [0 : 0 : 0] Time (hh:mm:ss) Alarm [0 : 0 : 0] Time (hh:mm:ss) Alarm [0 : 0 : 0]
To set the time of alarm:
1. Highlight this item and press to display a pop-up menu for the
hour field.
2. Key-in a value (Min=0, Max=23), then press .
3. Press tab to move to the minutes field, then press .
4. Key-in a minute value (Min=0, Max=59), then press .
5. Press tab to move to the seconds field, then press .
6. Key-in a value (Min=0, Max=59), then press .