Asus NCCH-DLE - Manual (Page 154)

5 - 4 2 5 - 4 2 5 - 4 2 5 - 4 2 5 - 4 2 C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n
5. Press + .
6. When a dialog box appears, press to create and quick initialize the
RAID set.
7. When prompted, press to continue.
8. After you have created the RAID set, press any key to reboot the system.
During the boot process, the FastTrak S150 TX4™ BIOS checks and
displays the disk array information.
9. Use the FDISK utility to format the array as a single hard drive.
10. After you have formatted the arrayed drives, install an operating
system (OS). The OS will treat the RAID set as a single drive unit.
Using quick initialization erases all data from the existing hard disk
drives. Make sure to backup all important data before using this RAID
configuration mode.