GE Industrial Solutions NEMA EVSE CHARGING STATION - Manual (Page 19)

g
EV Charging Station User Manual & Installation Instructions
GE EV Charging Station User Manual 19 of 86
2.6 Wall-Mounted
Bill of materials
ITEM DESCRIPTION CHARACTERISTICS QTY
1 Kiosk Unit Wall mounted
enclosure 1
2 Wall Bracket Assembly (4) ¼”-20 Weld
Stud 1
3 Hex. Nuts ¼”-20 Zinc Plated Steel 4
4 Sealing Washer, ¼” dia. Seals ¼” studs 4
5 Conduit Hub, ¾” Attach to ¾”
conduits/enclosure 2
- Table 5 -
Procedure
Drill 6 holes in the wall as illustrated in Figure 19. Use the supplied wall-mounting bracket to ensure
correct alignment. The height of the bottom hole from the floor should be between 19” to 25” to
Figure 18: Ethernet Connection to Controller for Double Pedestal
Controller 1
Controller 2
WARNING: Make sure power to the EVSE is
disconnected before performing any task