GE Industrial Solutions Control System Toolbox For Configuring the Trend Recorder - Manual (Page 14)

6
•
Chapter 2 Trend Recorder Window GEH-6408A Trend Recorder
Edit Menu
The Edit menu allows you to change the configuration of the Trend Recorder as
follows:
Delete All Data removes all data collected by the Trend Recorder.
Delete This Event removes the recorded event that is currently displayed.
Add Signal adds a signal to the Trend Recorder.
Remove Signal removes the signal selected in the lower Signal View.
Get Signals retrieves configuration information from the SDB for DLAN+ signals
in real-time trends.
Hide Selected Signals conceals signals that are selected in the lower Signal
View.
Show Signals selects which signals are displayed and hidden.
Change Signal Device changes the drive that a drive signal is trended from.
Time Axis changes the range of the time axis.
Edit Selected Signal changes the range, color, line width, and style for a signal.
Show on Left/Right Axis of the trace displays the range of the selected signal.
Auto Range Vert. Axis causes the graph to set the range of all signals based on
the values of the signals that are currently displayed on the graph.
Configure invokes the Trend Recorder Configuration dialog box to set up the trend.