GE Industrial Solutions Entellisys System Test Kit - Manual (Page 47)

System Test Kit 48
1.10 Post Analysis Selection screen
The Post Analysis feature allows users to analyze test results.
Users can generate reports and save to a USB Memory Stick. The reports are in HTML format.
NOTE: Upon exiting the Post Analysis screen, the USB drive will automatically eject. Users must
re-insert the USB Memory stick before generating the next report.
1.11 Test Reports
System Test Kit Reports can be generated from the Post Analysis screen. Depending on the type
of test for which the reports are generated, the output settings will change in the report.
All the reports are HTML reports and it will be generated on the USB Memory stick.
Following are the fields available in the Test Reports:
Table 1-18 Fields available in the test reports
General Test Information
Test Name Uniquely identified test kit-assigned name.
Operator Name Operator name that was entered while performing test.
Test Description Description of the test entered during testing.
Breaker Settings Displays the circuit breaker settings depending on the type of test for which
the report was generated. See Table 1-19 for the protection settings that will
display with respect to the test.
Breaker Name Name of the circuit breaker under test.
Compartment # Compartment number of the circuit breaker.
Frame Rating Prints the Frame rating of the circuit breaker.
CT Rating Prints the CT rating of the circuit breaker.
Rating Switch Prints the Rating switch value.
PT Rating Outputs the PT rating value.
Test Settings
Pre-Fault Settings All the Pre-Fault settings will be reported.
Fault Settings All the Fault settings that were injected during Fault time will be displayed.
Post-Fault Settings All the Post-Fault settings that were injected during post-fault time will
display.