GE Industrial Solutions Entellisys System Test Kit - Manual (Page 31)

System Test Kit 32
Test Results
The Test Results tab will be enabled when all the test points are tested. The test kit will display
the Expected, Observed, and the % error in the table.
Figure 1-16 Automatic Trip Time Test results
1.6.2 Relay Protection Test
The Relay Protection Test screen allows the user to perform various tests for Relay protection
functionality based on the options enabled in the system. Possible tests are as follows:
•
Over Frequency Test
•
Under Frequency Test
•
Overvoltage Test
•
Undervoltage Test
•
Phase Loss
•
Power Reversal
•
High Current Alarm
Over Frequency
Sets the frequency above the set point for the specified time delay.
Under Frequency
Sets the frequency below the set point for the specified time delay.