Ocean Optics LIBS2000+ - Manual (Page 39)

3: Operation
You can now add samples to the library.
2. Click the Add Sample button. The Scan button changes to a Save Samp button.
3. Set the number of scans to average and click the Save Samp button. A dialog box opens.
4. Enter the name of the sample in the dialog box and click the OK button. You are then prompted
to enter a name for the sample.
Assign a name that is indicative of the sample it will be representing. If you do not want to name
the sample, click the Cancel button to abort the sampling process.
161-00000-000-02-0406 29