Ocean Optics LIBS2000+ - Manual (Page 29)

3: Operation
Option Description
Percent Adjust Multiplier for the Real Time Background options. OOILIBS calculates the
background and multiplies it by this variable before subtracting.
Clean Shots
• Number of clean shots to take when you click the Clean button,
or
• Number of clean shots to take before each scan if you enable the
Use button.
Use External Triggering DLL Uses the External Triggering DLL. OOILIBS makes calls before and after
scans to this DLL file. You can replace this file with custom code.
Saturation Detect Displays a message if the spectrum is saturated.
Continuous Laser Mode Instructs the software to use the Continuous Laser mode. Only use this
mode with laser systems that must continuously fire the flash lamp.
Time Between Samples
Continuous Mode Delay that occurs after a scan (in Continuous mode) and prior to the next
scan.
Delay Between Scans
Averaging Delay between scans on any type of scan (averaging, shot count, etc.).
Use Radiometric Calibration Enables the radiometric calibration files
Set up Radiometric Information
Use this screen to assign calibration files to each channel.
To use the Radiometric Calibration screen, select the calibration files for each channel using the browse
button located between the two columns.
161-00000-000-02-0406 19