Ocean Optics LIBS2000+ - Manual (Page 23)

2: Installing the LIBS System
System Start-up
When you first use this LIBS2000+ Spectrometer on this computer, you must assign spectrometers to
channels and load the element library.
Assigning Spectrometers
► Procedure
1. Start the OOILIBS program. You may receive an error message the first time you start the
software. This is normal. Continue to Step 2.
2. Confirm that the spectrometers have installed properly. To do this,
a. Navigate to Control Panel | System (or right-click on My Computer and select Properties):
For Windows 2000/XP: Click the Hardware tab, then click the Device Manager button.
For Other Windows Versions: Click the Device Manager tab. The System Properties
screen appears.
b. Click on the Ocean Optics Devices node. If this node is absent, expand the USB Devices
node. Seven HR2000 Spectrometer entries should be visible. This indicates that the
LIBS2000+ spectrometers have been properly installed.
161-00000-000-02-0406 13