Ocean Optics LIBS2000+ - Manual (Page 34)

3: Operation
Element ID Mode
Option Description
Lines Detected Displays the number of Elemental Lines detected, and lists them in a table
below.
You can click on any column header to sort the data by that column.
Double click on any line to zoom in on that line.
Analyze Analyzes the current sample in memory and displays the results.
Save Results Writes an ASCII file containing a list of the lines and elements.
Element List Displays the number of elements detected and displays a table of them below.
The element name, number of lines found, and the element probability are listed.
Search Width Specifies the range of pixels surrounding the wavelength to examine when
detecting a peak.
Peak Height Specifies the minimum height of a peak to qualify for inclusion on the list.
Range Sets the elemental analysis range. You can click the cursor buttons to use
current cursor positions.
Elemental ID Procedure
► Procedure
Follow the instruction below to use the Elemental ID Mode:
1. Select Mode | Element ID from the menu to open the Element Identification window.
2. Click the Scan button.
You should now have a list of lines detected in the left window of the Element Identification
window. If you do not obtain this data, increase the search width or decrease the peak height.
24 161-00000-000-02-0406