Ocean Optics OOIIrrad-C - Manual (Page 64)

6: Taking Measurements
Reflective color measurements do not require an irradiance calibration, but they do require a reference
spectrum. This reference scan is taken with the same optical configuration, except a perfect reflector is
placed at the same location as the samples.
► Procedure
To take a color measurement using the OOIIrrad-C application,
1. From the
OOIColor/OOIIrrad screen, select Configure | Spectrometer from the menu bar. The
Configure Spectrometer screen appears.
2. Select the Color Measurements tab.
58 000-20000-070-0905