Ocean Optics OOIIrrad-C - Manual (Page 35)

Chapter 4
Configuration
Overview
You must configure parameters for the following hardware components in your system:
• Spectrometer type
• A/D converter options
OOIIrrad-C stores your configuration information; you will not need to reenter this information the next
time you start OOIIrrad-C.
To begin hardware configuration, select Configure from the menu bar at the top of the main
OOIColor/OOIIrrad2 screen.
Configuring Hardware Parameters
Select Configure | Hardware from the menu bar or type CTRL + F8 to specify the spectrometer and A/D
converter you are using with your OOIIrrad-C application. The Configure Hardware screen appears.
000-20000-070-0905 29