Ocean Optics OOIIrrad-C - Manual (Page 62)

6: Taking Measurements
1. Set the
Spectral Graph Mode to uW/cm^2/nm.
2. Flip the Scan switch to ON. It is recommended to store a new dark scan frequently.
3. Verify your calibration data by scanning the calibration lamp once and overlaying that data on the
graph that displays when you select Lamp | Current Calibration Lamp’s Graph from the menu
bar. Select this menu item again to hide the calibration lamp’s graph.
Notes
You can change the Scans to Avg and the integration period, but you must store a new
dark spectrum.
Changing the Smoothing Size from the value used during calibration is not
recommended.
56 000-20000-070-0905