PowerWalker WinPower Software V.4.3.0.1 Manual User Manual
Page 81
81
Diagram 4-12-2
Select the device you want to monitor
Click the “Monitor Remote Device” item of the “Monitor” menu, and will pop up the “Monitor
Remote Device” dialog. Refer to the following diagram 4-12-3.
Diagram 4-12-3
User can enter a computer name or IP address in the "Monitor Remote Device" Dialog. Click the
“OK” button to finish the setting.
Now you can find the device in the WAN, Refer to the following diagram 4-12-4.