PowerWalker WinPower Software V.4.3.0.1 Manual User Manual
Page 57
57
All users indicate that the message will be sent to all computers in the same network with this
computer, no matter whether it is in the same domain.
Domain users indicate that the message will be sent to all computers only in the same NT domain
with this computer.
Special users indicate that the message will be sent only to one or a group of defined users, but
not others any more.
To realize the function, you should set up the “Add Broadcast User” dialog first. Refer to the
following diagram 4-2-2.
Diagram 4-2-2
In the dialog above, after inputting the computer name which will receive messages, select “OK”
button to finish the setting. The name of the computer which you have keyed in will be displayed in
the “Broadcast Message Settings” dialog. Select the events that will be sent to the users, and press
the “OK” button, the setting will become effective. Refer to the following diagram 4-2-3.