PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 48)

48
Diagram 3-2-22
23) "Communication Port Settings" Dialog
The "Communication Port Settings" dialog can be opened from the "COM Port Setting" item
of "System" menu.
On Linux and UNIX, PowerWalker-WinPower can't detect the serial port devices automatically. If
the system has a Serial Port that can’t be found in the default setting table, you must add it manually
in the "Communication Port Settings" dialog. Refer to the following diagram 3-2-23.
Diagram 3-2-23
The default serial port device, please refer to the following Table 3-2-23.
Platform Serial Port Device
Linux /dev/ttyS0 /dev/ttyS1.
Solaris /dev/ttya /dev/ttyb
HP-UX /dev/tty0p0 /dev/tty1p0 /dev/tty0p1 /dev/tty0p2
AIX /dev/tty0 /dev/tty1
UnixWare /dev/tty1A /dev/tty2A
Tru64 /dev/tty00 /dev/tty01
FreeBSD /dev/ttyd0 /dev/ttyd1
Table 3-2-23