PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 33)

33
Diagram 3-2-9
The function is only for UPS.
In the “Shutdown Settings” dialog, the setting parameters are shown in the following Table 3-2-9.
Parameter Unit Maximum
Value Minimum
Value Default Remark
Battery
backup time Minute 4320 1 10 When the check box with
the function is selected and
the utility power fails, , the
software will send the
shutdown command to UPS
once the setting time is
expired
，and the output of
UPS will be turned off
Shutdown
System __ __ __ No When this check box is
selected, System will be
shut down while the
appointed UPS is being turn
off.
Hibernate __ __ __ No When this radio box is