B&B Electronics MESR424T_D-MT_D-SC - Manual - Manual (Page 66)

8. Appendices
66
Power Supply Specifications
Power Supply
(External Supply
Required)
Voltage Requirements 10 to 48 VDC (58 VDC Max)
Power Consumption 6.0W (Max)
Locking barrel
connector input:
Voltage requirements:
10 to 30 VDC maximum
Class 2 grounded type supply only.
NOTE: Coaxial power cable must be in accordance with Class 2 requirements in Article 725 of the NEC. The locking
barrel connector must NOT be used in a hazardous environment.
Controls, Indicators and Connector Specifications
Switches Mode/Reset button
Hold in for 0 to 2 seconds for hardware
reset
Hold in for 2 to 10 seconds for Console
Mode/Reset (Do a hardware reset or
recycle power to exit Console Mode)
Hold in for more than 10 seconds to
reset to factory defaults
Indicators
Serial LED
(one per port)
Color = Green
Blink = Data traffic
Link LED
Color = Green
On = 100BaseTX
Off = 10BaseT
Blink = Data traffic
Ready LED
Color = Green
Blink (once per second) = System OK
Off = System NOT OK
Connectors
10BaseT/100BaseTX
Ethernet
RJ-45F (8 pin)
SC fiber SC connector
ST fiber ST connector
Serial 4 DB-9M or terminal block connectors
DC Power
5.08mm 2-position pluggable, lockable
terminal block